DWX-52DCi_photo_inside_ADC_standby_dgs.p

now with DWindeX performance management software

 
Roland DG - DWX-52DCi
Dental Milling Machine with Automatic Disk Changer

The DWX-52DCi 5-Axis Dental Mill with Disc Changer expands your lab production and profits with open architecture, material flexibility, unattended production, and now with new DWINDEX software for visualizing ROI and productivity at a glance. With a 6-slot Automatic Disc Changer, 15-station Automatic Tool Changer and other automated features, it offers the ultimate in 24-hour productivity for users of all skill levels. Capable of producing a wide range of restorations, including crowns, copings, bridges, inlays and onlays, veneers, abutments, implant bars, screw-retained crowns, digital dentures, models, surgical guides and bite splints, the DWX-52DCi provides an exceptionally powerful, efficient, affordable - and intelligent - dental restoration solution.

FEATURES

Increased productivity due to expanded capacity
Automatic Tool Changer (ATC)

Load the 15-station ATC with a variety of diamond coated, carbide and DGSHAPE by Roland hybrid tools to continuously mill jobs in different materials and multiple shades of zirconia without stopping production.

Automatic Disk Changer

Load the six material adapters with different shades of zirconia or any combination of material discs to suit your needs. Assign them with milling jobs and let the automatic disc changer do the rest.

Intelligent Tool Changer (ITC)

A feature of the simplified VPanel operation is an Intelligent Tool Control (ITC) function that instinctively swaps out tools directly from their position when they have reached their user-defined lifespan with a designated “partner tool” without needing to pause production. The ITC has been updated for the DWX-52D to allow for user-defined setup– users can now assign burs in any figuration they want in the Automatic Tool Changer (ATC).

Precision 5-Axis Milling

The DWX-52DCi features a spindle that can be replaced in a matter of minutes, without needing to call out a technician. No special tools, testing, or training is required.

Automatic Air Pressure Control

An automated regulator eliminates the need for manual air control adjustments by changing air volume based on material data via the CAM software.

User Replaceable Spindles

The DWX-52DCi features a spindle that can be replaced in a matter of minutes, without needing to call out a technician. No special tools, testing, or training is required.

SPECIFICATIONS

CUTTABLE MATERIAL

LOADABLE WORKPIECE WEIGHT

OPERATING SPEED

SPINDLE SPEED

NUMBER OF ADAPTERS HOUSE

COMPATIBLE COMPRESSED AIR

CONTROL COMMAND SET

POWER CONSUMPTION

EXTERNAL DIMENSIONS

INSTALLATION ENVIRONMENT

Zirconia, Wax, PMMA, Composite resin, PEEK, Gypsum, Fiber reinforced resin, CoCr sinter metal

Up to 850 g

XYZ axis: 6 to 1,800 mm/min. (0.24 to 70.9 in./min.)

6,000 to 30,000 rpm  

15

0.02 to 0.2 Mpa  

RML-1, NC code  

Approx. 200 W  

Width x Depth x Height 880 × 660 × 600 mm (19.5 × 26.0 × 23.6 in.)  

Indoor use, Altitude: Up to 2,000 m (6,562 ft.), Temperature: 5 to 40 °C (41 to 104 °F) Humidity: 35 to 80% (no condensation) Ambient Pollution Degree: 2 (as specified by IEC 60664-1), Short-Term Temporary Overvoltage: 1,440 V, Long-Term temporary Overvoltage: 490 V

NUMBER OF ADAPTERS HOUSE

LOADABLE WORKPIECE SHAPE

SPINDLE MOTOR

ROTARY AXIS TRAVEL ANGLE

ATTACHABLE BUR

INTERFACE

POWER REQUIREMENTS

OPERATING NOISE

WEIGHT

INCLUDED ITEMS

Step Section: 98.5 mm (3.88 in.) (diameter), height 10 mm(0.39 in.) Body Section: 95 mm (3.74 in.)(diameter), height max. 35mm(1.38 in.) Pin Diameter: 6 mm(0.24 in.)  

6

Brushless DC motor  

A: ±360°, B: ±30°

Shank Diameter: 4 mm (0.16 in.),

Length: 40 to 55 mm(1.57 to 2.17 in.)

USB

AC 100 V to 240 V ± 10%, 50/60 Hz, 2.0 A (overvoltage category II, IEC 60664-1)  

During Operation: 70 dB (A) or less (when not cutting), During Standby: 45 dB (A) or less  

105kg (231.5 lbs.)  

Power cord, USB cable, Manuals, DGSHAPE Software Package CD, Detection pin, Automatic correction jig, Material Adapters, Material AdapterRack, Pin-type material adapter, Hexagonal driver, Spanner (for spindle), Milling bur holders, Milling bur positioner, Cleaning tool,Option adapter ID labels, Dust collection hoses, Dust collection hose adapter, Regulator, Cleaning brush, etc.

DENTAL LABORATORY

(Ortho Tech)

A-3-3, Vantage, Jalan Desiran Tanjung,

10470 Tanjung Tokong, Penang, Malaysia

+60 4 299 8563

TRAINING CENTRE (Bio Learn)

ZV-12-02, Zeva Boulevard,

Persiaran Pinggiran Putra,

Bandar Putra Permai, 43300 Seri Kembangan, Selangor, Malaysia

EDUCATION

Podcast

Webinars

Events

Training

Blog

CONNECT WITH ORTHO TECH

  • Ortho Tech Facebook
  • Ortho Tech Instagram

CONNECT WITH BIO 3D

  • Bio 3D Facebook
  • Bio 3D Instagram

CONNECT WITH BIO LEARN

  • Bio Learn Facebook
  • Bio Learn Youtube

©2020 by Bio Dynamix Sdn. Bhd. (1329046-P). All Rights Reserved.